View G6S-2F-Y_4699128.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Low Signal Relay
G6S
Suface Mount DPDT Relay
* High dielectric withstand voltage of 2,000 VAC between coil and contacts (standard type); 1,500 VAC between contacts of different polarity. * Meets FCC Part 68 and Telcordia 2.5 kV surge withstand. * European version certified for EN60950/EN41003 Supplementary Insulation at 250 V at Pollution Degree 2. * Low power consumption of 140 mW (Non-latching) * Available in through-hole and SMT terminals. * Tape and reel or tube packaging. * RoHS Compliant.
Ordering Information
Standard Version
. Model Terminal Contact form Gull-wing Inside "L" PCB through-hole DPDT Standard G6S-2F G6S-2G G6S-2 Non-latching European Version* G6S-2F-Y G6S-2G-Y G6S-2-Y Single coil latching G6SU-2F G6SU-2G G6SU-2 Dual coil latching G6SK-2F G6SK-2G G6SK-2
* Certified for EN60950/EN41003 Supplementary Insulation at 250 V (pollution degree 2)
Notes: 1. When ordering, add the rated coil voltage to the model number. Example: G6S-2F DC12 Rated coil voltage 2. When ordering tape packing (surface mount models), add "-TR" to the model number. Example: G6S-2F-TR DC12 Tape packing "-TR" is not part of the relay model number. Therefore, it is not marked on the relay case. 3. Dual coil latching models are available with a High-sensitivity coil. (140 mW; 200 mW for DC24) When ordering High-sensitivity dual coil latching models, add "-H" to the model number. Example: G6SK-2G-H-TR DC5 High-sensitivity coil
Model Number Legend
G6S 1
23
4
5
DC 6
3. Terminal Shape None: Through-hole F: Gull-wing surface mount G: Inside "L" surface mount 4. Approved Standards None: UL/CSA Y: EN60950/EN41003 (Standard coil models) 5. Packaging None: Tube packaging TR: Tape and reel packaging (Surface mount models) 6. Rated Coil Voltage 4.5, 5, 12, 24
1. Relay Function None: Non-latching U: Single coil latching K: Dual coil latching 2. Contact Form 2: DPDT
Low Signal Relay
G6S
95
Specification
Contact Data
Load Rated load Contact material Max. carry current Max. operating voltage Max. operating current Max. switching capacity Min. permissible load 0.5 A at 125 VAC 2 A at 30 VDC Ag (Au clad) 2A 250 VAC, 220 VDC 2A 62.5 VA, 60 W 10 A, 10 mVDC Resistive load (cos = 1)
Note: P level: 60 = 0.1 x 10-6/operation This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 . This value may vary depending on the operating environment. Always double-check relay suitability under actual operating conditions.
Coil Data
G6S - Standard Non-latching (G6S-2F, G6S-2G, G6S-2)
Rated voltage (VDC) 4.5 5 12 24 Rated current (mA) 31.0 28.1 11.7 8.3 Coil resistance () 145 178 1,028 2,880 170% max.@ 23C Approx. 200 Pick-up voltage 75% max. Dropout voltage % of rated voltage 10% max. 200% max.@ 23C Approx. 140 Maximum voltage Power consumption (mW)
G6SU - Standard Single Coil Latching (G6SU-2F, G6SU-2G, G6SU-2)
Rated voltage (VDC) 4.5 5 12 24 Rated current (mA) 22.2 20.0 8.3 6.3 Coil resistance () 203 250 1,440 3,840 Coil Inductance (H) (ref. value) Armature OFF 0.27 0.36 2.12 5.80 Armature ON 0.14 0.18 1.14 3.79 Approx. 150 Set pick-up voltage 75% max. Reset pick-up Power Maximum voltvoltage consumption age (mW) % of rated voltage 75% max. 180% max. @ 23C Approx. 100
G6SK - Standard Dual Coil Latching (G6SK-2F, G6SK-2G, G6SK-2)
Rated voltage (VDC) 4.5 5 12 24 Rated current (mA) 44.4 40 16.7 12.5 Coil resistance () 101 125 720 1,920 Coil Inductance (H) (ref. value) Set Reset Armature Armature Armature Armature OFF ON OFF ON 0.12 0.14 0.60 1.98 0.074 0.088 0.41 1.23 0.082 0.098 0.46 1.34 0.14 0.16 0.54 2.23 140% max. Approx. 300 @ 23C Set pick-up voltage Reset pick-up voltage Power Maximum consumption voltage (mW) 170% max. Approx. 200 @ 23C
% of rated voltage 75% max. 75% max.
G6S - European Version, Non-latching (G6S-2F-Y, G6S-2G-Y, G6S-2-Y)
Rated voltage (VDC) 5 12 24 Note: 1. 2. 3. 4. Rated current (mA) 40.0 16.7 9.6 Coil resistance () 125 720 2,504 Approx. 230 Pick-up voltage 75% max. Dropout voltage % of rated voltage 10% max. 170% max.@ 23C Approx. 200 Maximum voltage Power consumption (mW)
The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. The operating characteristics are measured at a coil temperature of 23C. Pick-up voltage will vary with temperature. The maximum voltage is the highest voltage that can be imposed on the relay coil.
96
Low Signal Relay
G6S
Characteristics
Contact resistance (See note 1) Operate (set) time (See note 2) Release (reset) time (See note 2) Bounce time Max. operating frequency Insulation resistance (See note 3) Dielectric strength 75 m max. 4 ms max. (mean value approx. 2.5 ms G6S; 2.0 ms G6SU, G6SK) 4 ms max. (mean value approx. 1.5 ms G6S; 2.0 ms G6SU, G6SK) Approx. 0.5 ms Mechanical: 36,000 operations/hr Electrical: 1,800 operations/hr (under rated load) 1,000 M min. (at 500 VDC) 2,000 VAC, 50/60 Hz for 1 minute (G6S, G6SU) between coil and contacts 1,000 VAC, 50/60 Hz for 1 minute (G6SK) between coil and contacts 1,500 VAC, 50/60 Hz for 1 minute between contacts of different poles 1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole 500 VAC, 50/60 Hz for 1 minute between set and reset coils (G6SK) Conforming to Telcordia specs. Conforming to FCC Part 68 Vibration Shock Ambient temperature Ambient Humidity Service life Mechanical Electrical Mechanical durability Malfunction durability Mechanical durability Malfunction durability 2,500 V (2 x 10 S) between coil and contacts for G6S and G6SU 2,500 V (2 x 10 S) between contacts of different poles 1,500 V (10 x 160 S) between coil and contacts for G6SK 1,500 V (10 x 160 S) between contacts of same pole 10 to 55 Hz; 5 mm double amplitude 10 to 55 Hz; 3.3 mm double amplitude 1,000 m/s2; approx. 100 G 750 m/s2; approx. 75 G -40 to +85C with no icing; -40 to +70C with no icing (G6SK, DC24 coil) 5% to 85% RH 100,000,000 operations min. (at 36,000 operations/hour) 100,000 operations min. (2A@30VDC, resistive; 1,200 ops/hr.) 100,000 operations min. (0.5A@125VAC, resistive) See "Characteristic Data" Approx. 2g
Surge withstand voltage
Weight
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method. 2. Values in parentheses are typical values unless otherwise stated. 3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength (except between the set and reset coil). 4. Data shown are of initial value.
Characteristic Data
Service Life
1000 1000 1000
500
Contact resistance (m)
500
Contact resistance (m) Contact resistance (m)
500 300 200 100
300 200 100
300 200 100
50 30 20
50 30 20
50 30 20
10
10 0 0.2 0.4
6
10 0 0.1 0.2
6
0.6
0.8
1.0
0.3
0.4
0.5
0
0.2
0.4
0.6
0.8
1.0
Service life (x10 operations) Resistive load: 10 mA, 10 VDC Ambient temperature: +85
Service life (x10 operations) Resistive load: 100 mA, 28 VDC Ambient temperature: +85
Service life (x106 operations) Resistive load: 100 mA, 50 VDC Ambient temperature: +85
Low Signal Relay
G6S
97
Maximum Switching Capacity
Ambient Temperature vs. Maximum Coil Voltage
Non-latching Single Coil Latching Dual Coil Latching
12 VDC max.
Switching current (A)
Maximum coil voltage (%)
Maximum coil voltage (%)
G6SU
AC resistive load
24 VDC (G6S-Y, 12 VDC max.) 24 VDC (G6S-Y)
G6SK 12 VDC max.
G6SK 24 VDC
DC resistive load
Switching voltage (V)
Ambient temperature (C)
Ambient temperature (C)
Reference Data Ambient Temperature vs. Switching Current
Non-latching
Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.
Single Coil Latching Dual Coil Latching
Switching current (A)
Operating current (A)
G6SU 12 VDC max. G6SU 24 VDC G6SK 12 VDC max.
12 VDC max.
24 VDC (G6S-Y) 24 VDC (G6S-Y, 12 VDC max.)
G6SK 24 VDC
Ambient temperature (C)
Ambient temperature (C)
Electrical Service Life
500 300
Service life (x10 operations)
Dielectric Strength (Standard Version, Non-latching)
Detecting current: 1mA
50 50
100 70 50 30 125 VAC 30 VDC
Number of contacts (pcs.)
Number of contacts (pcs.)
200
40
40
30
30
4
20
20
10
10
10
0
0.4
0.8 1.2 1.6 Rated operating current (A)
2.0
0 1000 1500 2000 2500 3000 Breakdown voltage (V) Between coil and contacts 3500
0
1000
1500
2000 2500 3000 Breakdown voltage (V)
3500
Between contacts of different poles Between contacts of same pole.
98
Low Signal Relay
G6S
Impulse Withstand Voltage (Standard Version, Non-latching)
(2 x 10 ms)
9
(10 x 160 ms)
15
(10 x 160 ms)
9
Number of contacts (pcs.)
Number of contacts (pcs.)
6
10
Number of contacts (pcs.)
6
3
5
3
0
3500
4000 4500 5000 Breakdown voltage (V)
5500
6000
0 1500
2000
Between coil and contacts
2500 3000 3500 Breakdown voltage (V) Between contacts of same pole
4000
0
3500
4000 4500 5000 5500 Breakdown voltage (V)
6000
Between coil and contacts Between contacts of different poles
Impulse Withstand Voltage (European version)
(2 x 10 ms)
9
(10 x 160 ms)
15
(10 x 160 ms)
9
Number of contacts (pcs.)
Number of contacts (pcs.)
Number of contacts (pcs.)
6
10
6
3
5
3
0
4000
4500 5000 5500 6000 Breakdown voltage (V)
6500
0 1500
2000
2500 3000 3500 Breakdown voltage (V) Between contacts of same pole
4000
0
4000
4500 5000 5500 6000 Breakdown voltage (V)
6500
Between coil and contacts Between contacts of different poles
Between coil and contacts Between contacts of different poles
Dielectric Strength (European Version, Non-latching)
Detecting current: 1mA
50 50
40
Number of contacts (pcs.) Number of contacts (pcs.)
40
30
30
20
20
10
10
0 1500 2000 2500 3000 3500 Breakdown voltage (V) Between coil and contacts 4000
0
1500
2000 2500 3000 3500 Breakdown voltage (V)
4000
Between contacts of different poles Between contacts of same pole
Low Signal Relay
G6S
99
Dimensions
Note: 1. All units are in millimeters unless otherwise indicated. 2. Coplanarity is 0.1 mm max.
Standard
G6S-2F, G6S-2F-Y Tolerance: 0.3 Terminal Arrangement/ Internal Connections (Top View)
Orientation mark
Footprint (Top View) Tolerance: 0.1
G6S-2G, G6S-2G-Y Tolerance: 0.3 Terminal Arrangement/ Internal Connections (Top View)
Orientation mark
Footprint (Top View) Tolerance: 0.1
G6S-2, G6S-2-Y Tolerance: 0.3
Terminal Arrangement/ Internal Connections (Bottom View)
Orientation mark
Footprint (Bottom View) Tolerance: 0.1
Eight, 1-dia. holes
100
Low Signal Relay
G6S
Single Coil Latching
G6SU-2F Tolerance: 0.3
7.3+0.2
Terminal Arrangement/ Internal Connections (Top View)
Orientation mark
Footprint (Top View) Tolerance: 0.1
G6SU-2G Tolerance: 0.3
7.3+0.2
Terminal Arrangement/ Internal Connections (Top View)
Orientation mark
Footprint (Top View) Tolerance: 0.1
G6SU-2 Tolerance: 0.3
Terminal Arrangement/ Internal Connections (Bottom View)
Orientation mark
Footprint (Bottom View) Tolerance: 0.1
Eight, 1-dia. holes
Low Signal Relay
G6S
101
Dual Coil Latching
G6SK-2F Tolerance: 0.3 Terminal Arrangement/ Internal Connections (Top View)
Orientation mark
Footprint (Top View) Tolerance: 0.1
G6SK-2G Tolerance: 0.3
7.3+0.2
Terminal Arrangement/ Internal Connections (Top View)
Orientation mark
Footprint (Top View) Tolerance: 0.1
G6SK-2 Tolerance: 0.3
Terminal Arrangement/ Internal Connections (Bottom View)
Orientation mark
Footprint (Bottom View) Tolerance: 0.1
Ten, 1-dia. holes
Recommended Soldering Method
(1) IRS Method (Mounting Solder: Lead) (2) IRS Method (Mounting Solder: Lead-free) Upper surface of case (peak): 255C max. Temperature (C) Temperature (C) 220 to 240 180 to 200 150 Preheating Preheating
Soldering Soldering
250 max. 230 180
Soldering
150
Preheating Relay terminal section 120 max.
90 to 120
20 to 30
Time (s)
30 max. Time (s) Note: The temperature profile indicates the temperature of the relay terminal section.
102
Low Signal Relay
G6S
Packaging
Tube packing Tape packing (Surface mount versions) Standard nomenclature 50 pcs per anti-static tube When ordering, add "TR" before the rated coil voltage (e.g., G6S-2F-TR-DC12) Note: TR is not part of the relay model number and will not be marked on the relay.
Tape and Reel Dimensions (Surface Mount Models)
* * * * Tape type: TE2416R (Refer to EIAJ - Electronic Industrial Association of Japan) Reel type: R24E (Refer to EIAJ - Electronic Industrial Association of Japan) Relays per reel: 400 Reels per packing carton: 2 (800 relays)
29.51.0 20.3 25.50.5
G6S-2F, G6SU-2F, G6SK-2F, G6S-2F-Y
210.5 80
330
R1.0 130.2
G6S-2G, G6SU-2G, G6SK-2G, G6S-2G-Y
Cover tape
Carrier tape
Emboss tape
Orientation mark
Feed direction
Approvals
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40C
Type G6S-2, G6S-2F, G6S-2G G6SU-2, G6SU-2F, G6SU-2G G6SK-2, G6SK-2F, G6SK-2G G6SK-2-Y, G6SK-2F-Y, G6SK-2G-Y Contact form DPDT Coil rating 2 to 48 VDC 2 to 24 VDC Contact ratings Number of test operations 6,000 3 A at 30 VDC (Resistive) 0.3 A at 110 VDC (Resistive) 0.5 A at 125 VAC (General Use)
EN60950 / EN41003
Type G6S-2-Y, G6S-2F-Y, G6S-2G-Y DPDT Contact form Isolation Category Supplementary Isolation 250 VAC Voltage
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics individually defined in this catalog. 2. In the interest of product improvement, specifications are subject to change.
Low Signal Relay
G6S
103
Precautions
* Use a DC power supply with 5% or less ripple factor to operate the coil. * Do not use the G6S where subject to strong external magnetic fields. * Do not use the G6S where subject to magnetic particles or excessive amounts of dust. * Do not reverse the polarity of the coil (+, -). * Latching types are delivered in the reset position. We recommend that a reset voltage be applied in advance to start operation. * Do not drop the G6S or otherwise subject it to excessive shock. * Remove the relay from the packing immediately prior to usage.
Correct use
Long-term Continuously ON Contacts
Using the Relay in a circuit where the Relay will be ON continuously for long periods (without switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. We recommend using a latching relay (magnetic-holding relay) in this kind of circuit. If a single-side stable model must be used in this kind of circuit, we recommend using a fail-safe circuit design that provides protection against contact failure or coil burnout.
G6S (K) (-U) -2 Soldering
* Soldering temperature: Approx. 250C (At 260C if the DWS method is used.) * Soldering time: Approx. 5 s max. (Approx. 2 s for the first time and approx. 3 s for the second time if the DWS method is used.) * Be sure to adjust the level of the molten solder so that the solder will not overflow onto the PCB.
Claw Securing Force During Automatic Mounting
During automatic insertion of Relays, be sure to set the securing force of each claw to the following so that the Relay's characteristics will be maintained.
C A B
Relay Handling
Use the Relay as soon as possible after opening the moisture-proof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal failure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape. When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40C. Do not put the Relay in a cold cleaning bath immediately after soldering.
Dimension A: 1.96 N max. Dimension B: 4.90 N max. Dimension C: 1.96 N max.
104
Low Signal Relay
G6S
Omron Electronic Components, LLC
Terms and Conditions of Sales I. GENERAL 1. Definitions: The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Components LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor: Any distributor shall inform its customer of the contents after and including section III of these Terms. II. SALES 1. Prices; Payment: All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders: Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes: All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. III. PRECAUTIONS 1. Suitability: IT IS THE BUYER'S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER'S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference.
(b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that could present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. IV. WARRANTY AND LIMITATION 1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. V. INFORMATION; ETC. 1. Intellectual Property: The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data: Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications: Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller's practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions: The information on Seller's website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information. VI. MISCELLANEOUS 1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent. 3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment: These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision.
Low Signal Relay
G6S
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information.
Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at http://www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ELECTRONIC COMPONENTS LLC
55 E. Commerce Drive, Suite B Schaumburg, IL 60173
OMRON ON-LINE
Global - http://www.omron.com USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1 06/09 Specifications subject to change without notice Printed in USA
Low Signal Relay
G6S

▲Up To Search▲

Price & Availability of G6S-2F-Y

	To Download G6S-2F-Y Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .